tenant.l3out.node_profile.interface_profile.path_attachment¶
The path endpoints (ports and port channels) used to reach the external layer 3 network. The corresponding set of policies will be resolved into the specified leaf path endpoints.
ACI class |
|
RN |
|
Cursor |
|
Parent |
|
Atomic |
— |
Attributes¶
Accepted as keyword arguments of .path_attachment(target_dn) and of .set(**attrs) on this cursor. Enum parameters also accept the plain string.
parameter |
wire |
type |
values |
default |
description |
|---|---|---|---|---|---|
|
|
|
— |
— |
The logical interface identifier. |
|
|
|
— |
|
MultiPod Direct (back-to-back) Link feature When link is MultiPod Direct Link |
|
|
|
— |
— |
The IP address of the path attached to the layer 3 outside profile. |
|
|
|
|
Autostate feature When enabled an SVI automatically goes down when forwarding states of all ports attached to it is down |
|
|
|
|
— |
— |
The description of this configuration item. |
|
|
|
— |
— |
The encapsulation of the path attached to the layer 3 outside profile. |
|
|
|
|
Represents the scope of the encap |
|
|
|
|
|
— |
|
|
|
|
|
IPv6 DAD feature When disabled it will IPv6 DAD will be diasabled |
|
|
|
|
— |
— |
The override of the system generated IPv6 link-local address. |
|
|
|
— |
— |
The MAC address of the path attached to the layer 3 outside profile. |
|
|
|
|
Represents the mode (native etc.) of the encap. This property only takes affect ifInstT (Interface Instantiation Type) is external-svi and is ignored for sub-interface and l3-port |
|
|
|
|
— |
|
The maximum transmit unit of the external network. |
|
|
|
— |
|
The target differentiated service code point (DSCP) of the path attached to the layer 3 outside profile. |
Children¶
maker |
creates |
position |
|---|---|---|
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.forwarder_address |
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.rogue_exception_mac |
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.micro_bfd |
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.ptp_l3out |
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.secondary_ip_address |
|
|
tenant.l3out.node_profile.interface_profile.path_attachment.member_node_configuration |
APIC diagnostics¶
States the APIC can flag on this class — it accepts the configuration and reports the inconsistency afterwards.
Config issues
code |
meaning |
|---|---|
|
Conflicting access-encap to BD mapping |
|
Access encap node overlap |
|
Anchor node encap mismatch |
|
v4 and v4 anchor node sets are not matching |
|
External bridge profile mismatch |
|
CP-TEP configuration validations |
|
MPLS infra l3out validation for the consumer Lbl |
|
MPLS ConsLbl configuration validations |
|
Fault added via CSCvv00759 for identical l3extRsPathL3OutAtt |
|
LNodeP node/path configuration validations |
|
LNodeP node/vlif configuration validations |
|
LNodeP router id multicast configuration validations |
|
fvRtSummSubnet and l3extSubnet has same prefix |
|
Primary IP and floating ip are not in same subnet |
Faults
code |
condition |
|---|---|
|
|
|
|
|
|
|
|