tenant.l3out.node_profile.interface_profile.floating_svi¶
ACI class |
|
RN |
|
Cursor |
|
Parent |
|
Atomic |
— |
Attributes¶
Accepted as keyword arguments of .floating_svi(path_of_the_anchor_node, external_interface_encap) and of .set(**attrs) on this cursor. Enum parameters also accept the plain string.
parameter |
wire |
type |
values |
default |
description |
|---|---|---|---|---|---|
|
|
|
— |
— |
Dn of the Anchor Node |
|
|
|
— |
— |
Encap of the external l2/l3 interface @@@ Note: In switch, two External BDs on the same node cannot have @@@ the external encap. In order to support this for external encap @@@ on a node (it can come from any port relation), same BD vxlan @@@ id should be allocated |
|
|
|
— |
— |
Address of the external l3 interface |
|
|
|
|
— |
|
|
|
|
— |
— |
Description |
|
|
|
|
— |
|
|
|
|
|
Type of the external l2/l3 interface |
|
|
|
|
|
IPv6 DAD feature When disabled it will IPv6 DAD will be diasabled |
|
|
|
|
— |
— |
Override of system generated Ipv6 Link Local Addr |
|
|
|
— |
— |
Mac of the external l3 interface. The mac address is by default hard coded to “00:22:BD:F8:19:FF”. This is a reserved MAC address and all the l3 interfaces by default use this mac as the router mac. |
|
|
|
|
The BGP Domain mode. |
|
|
|
|
— |
|
The administrative MTU port on the aggregated interface. |
|
|
|
— |
— |
The name of the object. |
|
|
|
— |
|
Interface level Dscp value. |
Children¶
maker |
creates |
position |
|---|---|---|
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.bgp_peer |
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.infra_peer_connectivity_profile |
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.member_node_configuration |
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.nd_prefix_profile |
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.secondary_ip_address |
|
|
tenant.l3out.node_profile.interface_profile.floating_svi.bd_profile_container |
Bind aliases¶
Lazy references, resolved closed-world at push time.
alias |
target |
flavor |
relation |
|---|---|---|---|
|
|
DN — |
|
APIC diagnostics¶
States the APIC can flag on this class — it accepts the configuration and reports the inconsistency afterwards.
Config issues
code |
meaning |
|---|---|
|
Conflicting access-encap to BD mapping |
|
Access encap node overlap |
|
Anchor node encap mismatch |
|
v4 and v4 anchor node sets are not matching |
|
External bridge profile mismatch |
|
CP-TEP configuration validations |
|
MPLS infra l3out validation for the consumer Lbl |
|
MPLS ConsLbl configuration validations |
|
Fault added via CSCvv00759 for identical l3extRsPathL3OutAtt |
|
LNodeP node/path configuration validations |
|
LNodeP node/vlif configuration validations |
|
LNodeP router id multicast configuration validations |
|
fvRtSummSubnet and l3extSubnet has same prefix |
|
Primary IP and floating ip are not in same subnet |
Faults
code |
condition |
|---|---|
|
|
|
|
|
|
|
|
|
|